If you want to have satisfied and happiest customers for your heat transfer vinyl (HTV) craft, you will need to erect some mistakes that one made commonly. These common mistakes can affect the quality of your cloth or material on which you are crafting. What you need to do is to know about these common mistakes.
Mistake No 1: Not Selecting the Suitable Material for Vinyl Transfer Paper
Do you aware of the quality types and material differences of vinyl transfer paper? If not, keep in mind to choose the most suitable type of paper by checking its material. Choosing the perfect and suitable type of vinyl transfer paper would not have required much thinking. But yes, there is a need for keen consideration. So, make sure to have the accurate track for your needs that what you want and what you don’t.
You need to know that different brands have varied paper quality that can affect the print style of your stuff, i.e. T-shirt, or any other clothing material.
Not to choose the right type of paper is the remarkable mistake done by the majority of business owners. It’s the same as to select the wrong designation for the wrong job. Even, it’s completely wrong to get the quality outcome.
Mistake No 2: Not Considering the Correct Way to Use the Vinyl Transfer Paper
Is this enough for you to select the high-quality paper to start the heat transfer vinyl craftwork? For me, it’s a big no. Professionally, it is not OK to just pick the right equipment and start working. Here, you need to know the overall process to print the craft. As well as you need to know the use of selected equipment in the correct way. If one is pretty sure about these aspects, then allowed to carry with the HTV crafting.
But, if you are even in a minor doubt, then take a pause immediately. Maybe you are not proceeding is the right track. You need to reconsider the technique using to craft the design.
How do you ensure the correct way to do HTV crafting? Just by running a trial test on any rough stuff. This is the best to test your abilities too.
It’s better to run a trial test, instead of to ruin the final stuff with poor print quality.
Mistake No 3: Not Using the Heat Vinyl Machine Correctly
While final designing of Heat Transfer Vinyl crafting, you don’t need to be so fast. This step needs extra precautions and considerations. What you need to do is to take a quick check at Heat Transfer Machine. This will help you to get the high-quality print of the final design.
Some steps you need to follow while checking the Heat Vinyl Machine areas highlighted below;
- Needs to ensure that iron surface is not hot enough while printing
- Needs to check the pressure of the machine before printing
- Needs to check the position of the paper, should be placed correctly.