Heat press machine is one of the best ways to print on the surface, they can be used to produce a large number of prints in a short time.
Sometimes, not always. If you want to print, you will agree with us that you have encountered some bad situations.
It could be that the design wasn’t coming off well, or the heat press vinyl could not stick to the surface. This may be a big setback, especially if you are a novice.
One of the reasons for this type of problem is that you have not allowed the appropriate time, or the heat press temperature was too low or too high. The problem is that different types of fabrics have different temperature and time settings.
To help you avoid these frustrations, we have compiled heat pressing time guides and temperature charts for some of the most popular fabrics used in this machine. All you need to do is keep reading and you will learn more.
HTV Vinyl Heat Press Temperature Chart
Polyester: 270° F
Stretch Material: 302°F
Full Color: 315°F
Reflective Fabrics: 270°F
Glow in the Dark Fabrics: 315°F
Stubborn Fabrics: 315°F
Metallic Finish: 280°F
How to set the time and temperature settings of the heat press
Setting the time is not difficult. Most heat presses have digital time display settings, which you can adjust by pressing the "up or down" arrow keys or buttons. Some have a more traditional dial
, you just need to turn it to the time you like to adjust.
Modern heat presses have an automatic shut-off function. When the timer runs out, it will shut off the engine and even open the lid. You can identify the time dial by the minutes or seconds next to the numbers.
It's like setting the time. The only difference is that the dial has a Celsius or Fahrenheit sign. It's almost like using a microwave or oven.
Heat Press Time and Temperature Guide
The quality and clarity of the transfer depends on some factors. These factors are time, pressure and temperature. In order for the graphics to be transferred successfully, the values of these factors must be set to the value required by the fabric used.
Light-colored and dark-colored fabrics have different values. Light-colored fabrics are better at lower temperatures, and darker ones are used at higher temperatures.
Before proceeding, we want to explain another thing is to use dirty or crumpled shirts would hinder or make your transfer untidy. Therefore, please make sure that the shirt is free from dirt, especially oil stains. Also, make sure that the shirt is pressed and has no creases.
Without further ado, here is the guide of time and temperature. We will also let you know when the appropriate time to peel off the transfer paper.
Polyester or Sublimated Fabric
This type of fabric is very soft and does not require much heat. When heat press it, it is essential to apply the right amount of heat, and the heat should not stay in the machine for too long.
The ideal temperature for the fabric is 270°F, and the appropriate time is 10 seconds. The best time to peel off the transfer is 10s later.
HTV Vinyl is the simplest and cheapest item to start with a heat press. In order to get the best output of vinyl, you will need a higher temperature than polyester.
The ideal temperature for HTVRONT htv vinyl is 315°F. Apply strong pressure for 10-15 seconds to get a vivid and perfect design.
In fact, preheating the fabric before pressing decals will make the design on the shirt better.
This information could be overwhelming, especially if you are a novice. But don't let that stop you. You don't have to understand all of this. Recording them on a piece of paper can work miracles.
Another way to do this is to bookmark the page and check when it is needed.
Remember, the first step to get a good transfer is to get the right materials. Then there are temperature and time settings. We are confident that if you follow this guideline, you will make the most of heat transfers.